Back to Blog
Ruler measurements inches6/21/2023 Whilst the ability to return the blade quickly into the case can seem like a useful function, it can be very dangerous with a number of people each year being injured by wildly flailing hooks. Whatever you do, never allow the blade and hook to return uncontrolled at full speed when rewinding. Do not assume that the tape has taking the case length into account unless you are using one of the more advanced tapes mentioned above. When taking an internal measurement, therefore, it is important to bend the blade at the point at which it touches the object you're measuring to. Most tapes, however, leave it up to the user to take the length of the case into account. 7cm) and some more innovative ones even take the length of the tape into account by compensating for the case length on the blade or by using a viewing window. Some pocket tape measures feature a case with a known length (e.g. Be sure to use the hook properly when using your tape measure! Not only does this keep the blade in place whilst measuring, it also guarantees an accurate measurement by compensating for the thickness of the metal hook in the measurement. When taking external measurements, however, the hook can be placed around/behind the object and pulled gently towards the measurer. skirting board) providing an accurate measurement. from the inside edge of an object such as between one internal wall and another) the hook can be pushed against the object (e.g. Some people mistakenly think of this as a manufacturing defect but this is not the case. In other words it moves in and out ever so slightly. You will normally find (on any pocket tape of quality) that the hook 'floats'. In pocket tapes (as seen in the image below), this is usually a straight piece of metal attached to the blade by a number of rivets. The hook or 'tang' of the tape measure is the small, usually metallic component at the end of the blade.
0 Comments
Read More
Leave a Reply. |